Well pump replacement cost: pump type, depth and labor
Well pump replacement cost averages $1,897 nationally in 2026, with most homeowners paying $974 to $2,821, according to Angi's data from 1,339 projects. Pump type and well depth drive most of the spread.
| Typical replacement (Angi, avg $1,897) | $974–$2,821 |
| Submersible pump, installed (HomeGuide) | $1,000–$2,500 |
| Jet pump, deep well, installed (HomeGuide) | $500–$1,400 |
| Jet pump, shallow well, installed (HomeGuide) | $400–$1,000 |
| Constant pressure pump (HomeGuide) | $2,000–$5,000 |
| Added pipework and wiring labor (Angi) | +$250–$1,000 |
| Permit, where required (HomeAdvisor/Angi) | $50–$200 |
Cost by well depth
Deeper wells need stronger pumps, more drop pipe and wire, and a hoist to pull the old pump. Angi's 2026 depth ranges:
| Under 25 ft | $400–$3,000+ |
| 25–150 ft | $1,200–$5,500+ |
| Over 150 ft | $2,000–$10,000+ |
Submersible vs. jet pump
Submersible pumps sit down in the well and push water up; HomeGuide calls them the most common type and best for deep wells. Jet pumps sit above ground and pull water up, which suits shallow wells; HomeGuide notes they are generally used for wells under about 100 feet. If you are replacing like for like, the installer can usually reuse the existing setup. Switching types, or upgrading to a constant pressure system, adds parts and labor.
Is it really the pump?
A loss of water is not always a dead pump. A tripped breaker, a failed pressure switch, a waterlogged pressure tank or a bad control box can produce the same symptoms for far less money. Ask the contractor to test the electrical supply, pressure switch and tank before quoting a new pump. A pressure tank that short-cycles the pump (clicking on and off rapidly) can also shorten a new pump's life, so ask whether it should be replaced at the same time.
What to ask for in the quote
- Pump make, horsepower and type, and why it suits your well depth and household demand.
- Whether new drop pipe, wire, check valves or a pressure tank are included.
- Labor, hoist or pump-truck charges, and disposal of the old pump.
- Permit and water-testing requirements in your county.
- Warranty on the pump and on labor.
Related water costs
Well water often needs treatment: see whole house water filter cost and water softener installation cost.
Frequently asked questions
How much does it cost to replace a well pump?
Angi's 2026 national average is $1,897, with most homeowners paying $974 to $2,821. Deep wells and constant pressure systems cost more.
Does well depth change the price?
Yes. Angi lists $400 to $3,000+ for wells under 25 feet, $1,200 to $5,500+ for 25 to 150 feet, and $2,000 to $10,000+ for wells over 150 feet.
Is a submersible or jet pump cheaper?
Installed jet pumps are usually cheaper ($400 to $1,400 per HomeGuide) but suit shallower wells; submersible pumps run $1,000 to $2,500 installed.
Do I need a permit to replace a well pump?
Some counties require one. Angi and HomeAdvisor put typical permit costs at $50 to $200; check with your local health or building department.
Related cost guides
- Whole house water filter installation cost
- Water softener installation cost
- Plumber cost
- Expansion tank installation cost
Sources
- Angi: well pump replacement cost (2026 data)
- HomeGuide: well pump cost (2026)
- HomeAdvisor: replace a well pump
National figures from published 2026 cost guides, retrieved 10 Oct 2026. Local prices, especially in high-cost metros, can be higher. Always get written quotes.